pottery studio,the tools and four methods

A brief introduction to the tools and methods of the current pottery studio to make ceramics.

1, Pottery studio tools

1. Roulette wheel:

it is a tool for easy rotation during production. Manual rotation is applicable for repairing and making works.

2. Rolling stick:

made of lubricated hardwood and used for a clay board or tablet, similar to a rolling pin.


when making the work put the linen on the work, to ensure that the work will not be easily glued on the table, also suitable for the clay board when the linen texture effect.

4. Scraper and repair knife:

this tool is generally made of wood, which is the basic thing formed by hand. These things have various shapes due to the diversity of their functions, and are used for making works.

5. Annular carving knife:

it is used for repairing and hollowing out solid vessels. It is usually a metal ring decorated with various shapes on ordinary wood.

6.Mud clapper:

most of the tools used to thin and pat mud into the desired shape

7. Iron wire:

used for cutting clay blocks and the final process of casting and forming.

8.the casting machine:

used for making some of the circular body of the casting, casting molding method of the main production machine.

2, four methods of  pottery studio

1. Method of making clay strips:

Take a piece of mud, with both hands naturally pinched, change, make mud into a cylinder, after the cylindrical mud on the table, with the hands evenly rub, rolling rub, around the fingers walk, from thick to fine.Don’t use too much energy!This method is commonly used to make vases, cups and bowls.It can also be decorated with other methods, such as fencing.Pinch the hair, hands, feet and other parts of the body, the handle of the quilt and so on.Note: each mud bar should be kept even, each layer should be coated with mud on the surface and then pressed on, and each layer should be flattened, compacted and pressed evenly so as not to crack when dry.

2. Hand shaping method:

Hand knead molding method is used for making pottery is the most primitive, one of the most fundamental and the most brief way, also is the beginner to experience pottery, comprehension, the best way to mud sex is the thickness of mud, hard and soft, dry wet level of fundamental practice, knead can hand pinched the mud pie you want fabricated form, which is one of the old way of ceramics.Production works are: pinch flower, small man, rockery, small animals and so on!

3. Clay plate forming method:

Clay molding method is to use mud after artificial shin pressure mud stick into clay, and then use these clay for shape.Shin pressure mud, mud in the middle of the linen to peripheral shin pressure, carried out in accordance with the shape they want use DiaoSuDao after cutting.Note: pay attention to the thickness of the clay board, use a relatively soft clay paste.Mud can be used in a wide range of ways, from flat to solid.Can use the clay board wet soft degree to bend, roll, make their own work.

4. Casting production method:

it is a molding method that USES the machine to rotate the mud and USES the hand to pull the mud into various shapes. It is also the most common traditional molding method in ceramic production.It takes a long time to get familiar with the process, so start with the simplest cups, bowls, etc.

keywords:crafts   ceramic

Friendship reference:xinlang design

Posted in sequence 3 and tagged .